Pioneer Eclipse Diamond Shine™ 25% Solids Floor Finish (1 Gallon Bottles) - Case of 4
This Diamond Shine ultra high speed finish by Pioneer Eclipse is a metal cross-linked, all-purpose finish that leaves a tough, long lasting base with a "diamond" wet-look shine when used with one of our high speed burnishers on vct, terrazzo, concrete, marble, and quarry tile floors. The finish comes in a case of four 1 gallon bottles and will cover up to 3,000 sq. ft. per gallon. These finishes can be applied with a clean synthetic mop or with one of our wax applicators. Works great with our Luster Lite Pads. View our full line of floor wax & finishes to see what other finishes we have available for your floors.
2. Optional: Apply 2 thin coats of floor sealer for old or porous floors or for high traffic areas, then apply 4 coats of finish.
3. For a floor that has been deep scrubbed and allowed to dry thoroughly, apply 1-2 thin coats using a clean synthetic mop. Allow floor to dry thoroughly between coats and prior to burnishing.
Directions
1. For a floor that has been stripped, properly neutralized, rinsed and allowed to dry thoroughly, apply 5-6 thin coats using a clean synthetic mop. Allow the floor to dry thoroughly between coats and prior to burnishing.2. Optional: Apply 2 thin coats of floor sealer for old or porous floors or for high traffic areas, then apply 4 coats of finish.
3. For a floor that has been deep scrubbed and allowed to dry thoroughly, apply 1-2 thin coats using a clean synthetic mop. Allow floor to dry thoroughly between coats and prior to burnishing.
$135.44
Pioneer Eclipse Diamond Shine™ 25% Solids Floor Finish (1 Gallon Bottles) - Case of 4—
$135.44
Description
This Diamond Shine ultra high speed finish by Pioneer Eclipse is a metal cross-linked, all-purpose finish that leaves a tough, long lasting base with a "diamond" wet-look shine when used with one of our high speed burnishers on vct, terrazzo, concrete, marble, and quarry tile floors. The finish comes in a case of four 1 gallon bottles and will cover up to 3,000 sq. ft. per gallon. These finishes can be applied with a clean synthetic mop or with one of our wax applicators. Works great with our Luster Lite Pads. View our full line of floor wax & finishes to see what other finishes we have available for your floors.
2. Optional: Apply 2 thin coats of floor sealer for old or porous floors or for high traffic areas, then apply 4 coats of finish.
3. For a floor that has been deep scrubbed and allowed to dry thoroughly, apply 1-2 thin coats using a clean synthetic mop. Allow floor to dry thoroughly between coats and prior to burnishing.
Directions
1. For a floor that has been stripped, properly neutralized, rinsed and allowed to dry thoroughly, apply 5-6 thin coats using a clean synthetic mop. Allow the floor to dry thoroughly between coats and prior to burnishing.2. Optional: Apply 2 thin coats of floor sealer for old or porous floors or for high traffic areas, then apply 4 coats of finish.
3. For a floor that has been deep scrubbed and allowed to dry thoroughly, apply 1-2 thin coats using a clean synthetic mop. Allow floor to dry thoroughly between coats and prior to burnishing.
