Recovery Tank Drain Hose (#VF90443) for the Trusted Clean Dura Floor Scrubbers
This drain hose connects to the recovery tank on the Trusted Clean 'Dura 17' and 'Dura 20' automatic floor scrubbers. It is not only an integral part of emptying the recovered dirty water from your machine, but it is also an integral part of the recovery system. If it does not seal properly or is cracked, your auto scrubber will not perform to its maximum potential. From the recovery tank lid down to the squeegee assembly and recovery hose needs to be completely sealed to create as much suction as possible. An optimally performing machine will practically leave your floors complete dry after scrubbing them.
To dump your recovered dirty water, you should remove the rigid part of the hose from the bracket on the back of the Dura floor scrubber. Next, while still holding the hose upright, remove the cap and slowly start to point it downward into an acceptable recovery container (i.e. floor drain, bucket or toilet). Be careful, as the outgoing liquid can have lots of force, and make a mess very quickly.
For other related parts, please take a look at our full line of miscellaneous auto scrubber parts.
To dump your recovered dirty water, you should remove the rigid part of the hose from the bracket on the back of the Dura floor scrubber. Next, while still holding the hose upright, remove the cap and slowly start to point it downward into an acceptable recovery container (i.e. floor drain, bucket or toilet). Be careful, as the outgoing liquid can have lots of force, and make a mess very quickly.
For other related parts, please take a look at our full line of miscellaneous auto scrubber parts.
$9.80
Original: $27.99
-65%Recovery Tank Drain Hose (#VF90443) for the Trusted Clean Dura Floor Scrubbers—
$27.99
$9.80
Description
This drain hose connects to the recovery tank on the Trusted Clean 'Dura 17' and 'Dura 20' automatic floor scrubbers. It is not only an integral part of emptying the recovered dirty water from your machine, but it is also an integral part of the recovery system. If it does not seal properly or is cracked, your auto scrubber will not perform to its maximum potential. From the recovery tank lid down to the squeegee assembly and recovery hose needs to be completely sealed to create as much suction as possible. An optimally performing machine will practically leave your floors complete dry after scrubbing them.
To dump your recovered dirty water, you should remove the rigid part of the hose from the bracket on the back of the Dura floor scrubber. Next, while still holding the hose upright, remove the cap and slowly start to point it downward into an acceptable recovery container (i.e. floor drain, bucket or toilet). Be careful, as the outgoing liquid can have lots of force, and make a mess very quickly.
For other related parts, please take a look at our full line of miscellaneous auto scrubber parts.
To dump your recovered dirty water, you should remove the rigid part of the hose from the bracket on the back of the Dura floor scrubber. Next, while still holding the hose upright, remove the cap and slowly start to point it downward into an acceptable recovery container (i.e. floor drain, bucket or toilet). Be careful, as the outgoing liquid can have lots of force, and make a mess very quickly.
For other related parts, please take a look at our full line of miscellaneous auto scrubber parts.
